HI-TAK® Tape (HT-3935-7)
Av-DEC’s pre-cured polyurethane tape sealant has a fiberglass carrier providing two sided sealing. It is designed for sealing and moisture-proofing between irregular surfaces. This product works best when applied under compression between two surfaces. This product is also available in die cut in gasket form and in flame retardant (FR).
Download the Printable Information Sheet
Product Specs
| Part Number Series | HT3000-XXX (where XXX =width in hundredths of an inch) | HT3935-7-XXX (where XXX = width in hundredths of an inch) |
| Color | Gray | Plum |
| Thickness | 0.045” Nominal | |
| Dielectric Withstand Voltage | >400 volts/mil | |
| Shelf Life | Indefinite (in original packaging) | |
| Weight | 0.85 g/sq in | 0.71 g/sq in |
| Solvent Resistance | ASTM D-543 (Water, Polypropylene Glycol/Water, Skydrol LD-4, MIL-H-5606, Jet A), no Degradation of Physical Properties | |
| Test Data | 3000+ Salt Spray Test (ASTM B 117), Flammability (FAR25.853a Method 2) for FR version | |
| Reactivity to Polyethylene and Aluminum | None – Product supplied fully cured | |
| Service Temperature Guide | -65ºC to 135ºC (-85ºF to 275ºF) Continuous | |
| Material Safety Data Sheet | Refer to ‘Gasket; Metallic and Non-Metallic Frame.’ on the MSDS | |
Features & Benefits
Instructions & Applications
Photos
