Perfecting the science of corrosion prevention

Learn more about our corrosion preventing solutions

DSCF1054xxx

Thixoflex Black® is a two‐component polyurea material designed for use as a durable, watertight sealant. The high viscosity allows for easy application where vertical and overhead application is desirable. The system demonstrates excellent adhesion to itself (cohesion) and allows for easy removal when necessary. Similar to TG8498 and TG2010, with increased bonding strength and improved UV resistance, as well as a quicker gel time across a wide temperature range.  Thixoflex Black® is intended to be used as a fast‐curing perimeter sealant, gap sealant or faying surface sealant.  Common uses including sealing of antennas, lights, panels, leading edges cock pit windows and passenger windows.

pdfDownload the Printable Information Sheet

Project Specs

Product Name Thixoflex® Black
Part Number – 50cc TG3212-50
Part Number – 200cc TG3212-200
Color Black
Reaction Ratio (by weight) 100 : 93.7 Resin to Hardener
Reaction Ratio (by volume) 100 : 100
Specific Gravity , Resin, at 77°F(25°C) 1.11 to 1.14
Specific Gravity , Hardener, at 77°F(25°C) 1.04 to 1.07
Specific Gravity , mixed, at 77°F(25°C) 1.08 to 1.10
Viscosity, Resin, Cps at 77°F(25°C) 18,000 to 28,000
Viscosity, Hardener, Cps at 77°F(25°C) 25,000 to 42,000
Gel Time at 77°F(25°C) < 8 minutes
Full Cure at 77°F(25°C) <2 hours
Working Life at 77°F(25°C) < 4 minutes
Hardness at 77°F(25°C) Shore "A" 70 to 90
Dielectric Strength >427 volts/mil
Storage Temperature > 55.4ºF (13ºC)
Shelf Life 6 months (in original packaging and used within 24 hours after opening)
Service Temperature Guide -85ºF to 185ºF (-65ºC to 85ºC)
Application Temperature > 55.4ºF (13ºC)
Peel Strength 16.31 piw
Tensile Strength (ASTM D412) 268.97 PSI
Salt Fog 3000hrs (ASTM B117) No Corrosion Present
Material Safety Data Sheet SDS information can be requested at

stretchseal

Av-DEC's pre-cured polyurethane elastomeric sealant has a foam carrier designed for sealing and moisture-proofing around mated electrical connectors, coaxial connectors, and circumferential and irregular surfaces. This product is very cohesive in nature and provides an environmental seal when stretched/applied around mated connectors.

pdfPrintable Product Info Sheet

Connector Sealing Kit with Potting Compound Installation Video

Connector Sealing Kit without Potting Compound Installation Video

Product Specs

Part Number AD89503 - XX-YY (XX=width, YY=length), available in kits EN110589; AD27500; AD28500
Color Plum
Width (XX)/Length (YY)/Thickness (XX) = .5", 1.0", 1.5", 2.0" / (YY) = Length in inches / Nominal thickness 0.063"
Shelf Life Indefinite (in original packaging)
Reactivity to polyethylene and Aluminum None - Product supplied fully cured
Service Temperature Guide -65ºC to 135ºC (-85ºF to 275ºF) Continuous
Safety Data Sheet SDS information can be requested at

 

idea4

Av-DEC's pre-cured polyurethane tape sealant has a fiberglass carrier providing two sided sealing. It is designed for sealing and moisture-proofing between irregular surfaces. This product works best when applied under compression between two surfaces. This product is also available in die cut in gasket form and in flame retardant (FR).

pdfDownload the Printable Information Sheet

Product Specs

Part Number Series HT3935-7-XXX (where XXX = width in hundredths of an inch)
Color Plum
Thickness 0.025" Reduced (HT3935RT-XXX)
0.045” Nominal
0.080" Extra (HT3935ET-XXX)
Dielectric Withstand Voltage >400 volts/mil
Shelf Life Indefinite (in original packaging)
Weight 0.71 g/sq in
Test Data 3000+ Salt Spray Test (ASTM B 117), Flammability (FAR25.853a Method 2) for FR version
Reactivity to Polyethylene and Aluminum None – Product supplied fully cured
Service Temperature Guide -65ºC to 135ºC (-85ºF to 275ºF) Continuous
Safety Data Sheet SDS information can be requested at

tufseal2.0

Av-DEC's pre-cured polyurethane tape sealant has a fiberglass carrier and PTFE backing for one sided sealing. The tape is specifically designed for repeated use to seal and moisture-proof irregular surfaces where abrasion resistance is required. The system demonstrates excellent adhesion to itself (cohesion) and allows for easy removal when necessary. This product is also available in die cut in gasket form. Common uses are under floor boards, under lavs and galleys, under door sills and on stringers. This product is also available in flame retardant (FR).

pdfDownload the Printable Information Sheet

The TufSeal™ (HT-3000) Installation Video

Product Specs

Part Number Series HT3000-XXX (where XXX =width in hundredths of an inch)
Color Gray
Thickness 0.025" Reduced (HT3000RT-XXX)
0.045” Nominal
Dielectric Withstand Voltage >400 volts/mil
Shelf Life Indefinite (in original packaging)
Weight 0.85 g/sq in
Test Data 3000+ Salt Spray Test (ASTM B 117), Flammability (FAR25.853a Method 2) for FR version
Reactivity to Polyethylene and Aluminum None – Product supplied fully cured
Service Temperature Guide -65ºC to 135ºC (-85ºF to 275ºF) Continuous
Safety Data Sheet SDS information can be requested at